AL HASEEB TEXTILES · BUYER RESOURCES
Source towels from Pakistan with a clear specification
Comparing towel manufacturers in Pakistan starts with evidence: who makes the product, what the finished towel must achieve, and how the order will be tested and packed. This guide helps importers, hotel suppliers, distributors and private-label brands prepare a buying brief and compare quotations on the same basis.
Prepared by Al Haseeb Textiles · 24 October 2026
For our towel range, factory information and a bulk quotation, visit towel manufacturing in Pakistan.
1. Verify the towel manufacturer and production scope
Confirm the supplier’s business name, factory address and contact details before comparing prices. Ask which stages are performed in-house and which use processing partners. A clear production map helps you agree who controls weaving, dyeing, finishing, stitching, testing and final inspection.
| Check | Evidence to request | How to use it |
|---|---|---|
| Company identity | Business name, address, company contact and relevant trade listing | Match the supplier details across the quotation and supporting documents. |
| Factory and process | Current factory photographs, a live video walkthrough or an agreed visit; in-house and outsourced stages | Confirm that the proposed towel construction fits the production setup. |
| Trade presence | A relevant industry association or exhibitor listing | Use it to corroborate identity; membership alone does not establish product quality. |
| Certification claims | Certificate number, holder, covered articles and validity | Use the issuing body’s official verification service and check that the quoted product is within scope. |
| Order capability | Proposed sample, bulk schedule, inspection checkpoints and packing plan | Approve a specification and realistic shipment plan for this order. |
Al Haseeb example: our Towel Manufacturers Association of Pakistan profile identifies Al-Haseeb Textiles and its Karachi address. Our current manufacturing information states that towel weaving uses Dyna Terry Looms in-house and dyeing uses processing partners. Review the factory information alongside the proposed sample.
For an OEKO-TEX claim, enter the certificate or label number in the official OEKO-TEX Label Check. Certification verification and product performance testing answer different questions; use both where required for your order.
2. Compare GSM, size and finished piece weight together
GSM means grams per square metre. It describes fabric mass per area, rather than the weight of one towel. Compare towels at the same finished size and composition, and agree whether each quotation uses grams per piece, kilograms per dozen or pounds per dozen.
Planning formula: width in metres × length in metres × GSM = estimated grams per piece. Multiply by 12 and divide by 1,000 for kilograms per dozen.
| Target GSM | Approx. weight per piece | Approx. weight per dozen |
|---|---|---|
| 400 | 392 g | 4.704 kg |
| 450 | 441 g | 5.292 kg |
| 500 | 490 g | 5.880 kg |
These area-based calculations help compare quotations; they are not measured test results or guaranteed product weights. Borders, hems, finishing, moisture and agreed measurement conditions can affect the finished article. Approve actual finished dimensions and weight with tolerances on the sample. A higher GSM alone does not establish absorbency or wash durability.
Your specification should also state fibre composition, yarn and pile construction, border design, shade, hem finish, label details and intended laundry use. The GSM and finished-weight worksheet provides a separate buying reference.
3. Approve samples with a written testing plan
Keep an identified, approved reference sample with the supplier and buyer. Record its article code, size, colour and approval date. For hospitality supply, assess the sample under the intended washing and drying process before releasing bulk production.
| Check | Record before approval |
|---|---|
| Dimensions and weight | Finished width and length; grams per piece or weight per dozen; tolerances and measurement conditions. |
| Absorbency | Agreed test method, sample preparation and acceptance limit. ASTM D4772 covers surface water absorption of terry fabrics; select the applicable edition with the laboratory. |
| Dimensional change | Before/after measurements, wash and dry conditions, cycle count and acceptable change. ISO 5077 addresses dimensional change with specified washing and drying procedures. |
| Shade and colourfastness | Approved shade reference, colourfastness requirements for the intended use and agreed laboratory methods. |
| Workmanship and appearance | Hems, stitching, loose threads, loop pulls, border alignment, linting and appearance after laundering. |
| Labels and packing | Fibre/care information required for the destination, label placement, barcode artwork, pack quantity and approved carton marks. |
Agree the methods and pass/fail limits in the purchase specification. Test reports should identify the sample and report date, method, conditions and results. A report for a different article or construction does not automatically establish performance for the quoted towel.
Before shipment, agree how bulk goods will be sampled, how defects will be classified, the acceptance plan and what happens if a check fails. Use our pre-shipment inspection guide and commercial laundry specification guide for the next checkpoints.
4. Turn the MOQ into a practical assortment plan
Ask whether the minimum applies per order, quality, colour, size or design. Splitting one order across several colours and dimensions can create several separate minimums.
Al Haseeb towel MOQ: our current towel programme states 200 kg per colour, per size. For a 70 × 140 cm towel with an estimated finished weight of 490 g, 200,000 ÷ 490 = approximately 408.2 pieces; rounding up gives 409 pieces as a planning estimate. The final order quantity depends on the approved finished weight and agreed packing multiple.
For example, two sizes in three colours create six size/colour combinations. At 200 kg each, the planning minimum is 1,200 kg, subject to the agreed construction and order terms. Do not treat 200 kg as a mixed-size, mixed-colour total.
Our main towel page states a 45–60 day production lead time for a 40-ft container after order confirmation. Confirm sample development, approvals, materials and the production start point in the quotation; freight transit is additional. Sample costs and timing should be agreed for the selected towel rather than assumed from another product category.
Compare the quotation’s unit, currency, quantities, named delivery place or port, freight scope and payment terms. Keep the specification constant when comparing suppliers. See the first towel import order checklist.
5. Approve export packing using a physical trial
Agree folding, inner packs, pieces per carton, carton strength and shipping marks before finalising loading. Pack the actual towel quality and measure the trial carton; estimated towel volume alone is not enough to promise carton dimensions.
| Item | What to record |
|---|---|
| Inner packing | Pieces per pack, bag/retail sleeve, assortment, labels and any compression requirement. |
| Outer carton | Pieces per carton, actual external length × width × height, carton specification and sealing. |
| Weight | Net product weight and measured gross weight including bags, labels and carton. |
| Shipping marks | Article, size, colour, quantity, carton number, purchase order and buyer-approved destination information. |
| Shipment planning | Total cartons, cubic metres, handling/pallet requirements and final loading plan. |
Weight example: 24 towels at 490 g each give a net towel weight of 11.760 kg. Weigh the completed carton to establish its gross weight.
CBM example: if a trial carton actually measures 60 × 40 × 40 cm externally, its volume is 60 × 40 × 40 ÷ 1,000,000 = 0.096 m³. At that measured size, 100 cartons total 9.6 m³ before any pallet allowance. The dimensions illustrate the formula and are not a recommended carton size for the towel example.
Reconcile the packing list with actual carton counts and weights. Agree the commercial invoice, packing list, origin documents and any buyer-required test or inspection records for the shipment. Our export packing and shipment planning guide covers this stage in more detail.
6. Send a towel specification for a comparable quote
Copy this buying brief into your enquiry:
- Product and use: bath towel, hand towel, bath sheet, washcloth or bath mat; hotel, laundry, retail or private label.
- Finished size, GSM or grams per piece, fibre composition and reference sample.
- Quantity for each size, colour and design.
- Border, shade, embroidery, labels and barcode requirements.
- Sample tests, tolerances and approval requirements.
- Pieces per pack/carton, destination country and port, and requested shipment date.
Send your towel brief on WhatsApp
Request samples and a bulk quotation · Explore Al Haseeb towel manufacturing
Sources and verification tools
The references below support company verification and the test-method descriptions. Calculations in this guide are illustrative purchasing examples.
- TMA: Al-Haseeb Textiles company profile — company and location cross-check.
- OEKO-TEX Label Check — official certificate/label verification.
- ASTM textile standards catalogue — D4772 for surface water absorption of terry fabrics.
- ISO 5077:2007 — dimensional change in washing and drying.